1、1結構 Structure
1 2
船廠 dockyard/shipyard 船塢 dock/boatyard
船東 ship-owner 船舷 Ship's side
船碼頭 quay/dock 船的欄桿 Ship's rail
船艙 hold 甲板 Deck
船籍 Ship's registry 住艙甲板 accommodation deck
船首 bow 梁拱甲板 arch deck
船梯 ladder 載貨甲板 cargo deck
船尾 stern 首樓甲板 Forecastle deck
2
船塢 dock/boatyard
船舷 Ship's side
船的欄桿 Ship's rail
甲板 Deck
住艙甲板 accommodation deck
梁拱甲板 arch deck
載貨甲板 cargo deck
首樓甲板 Forecastle deck
上甲板 Upper deck
下甲板 Lower deck
主甲板 Main deck
貨艙甲板 Hold deck
橋樓甲板 Bridge deck
水密甲板 Watertight deck
3
駕駛甲板 Navigation deck
艇甲板 Boat deck
羅經甲板 Compass deck
板 Plate
舭板 Bilge plate
船底板 Bottom plate
船外板 Shell plate
船首外板 Bow plate
肘板 Bracket plate
艙壁板 Bulkhead plate
槽形艙壁板 Corrugated bulkhead plate
舷墻板 Bulwark plate
圍板 Coaming plate
連續板 Connection plate
4
銅-鋼復合板 Copper sheathing steel plate
甲板邊板 Deck stringer plate
斜板 Sloping plate
加強板 Reinforcement plate
舵板 Rudder plate
舷側外板 Side plate
裙板 Skirt plate
首柱板 Stem plate
首柱板 Stern plate
平臺 platform
機艙平臺 Engine-room platform
分段 Block
首段 Bow block
中段 Midship block
5
尾段 Stern block
左舷 port
右舷 Starboard
縱桁 Girder
型材桁 Bar girder
中底桁 Bottom center girder
中內龍骨 Bottom center line girder
底桁材 Bottom girder
旁桁材 Bottom side girder
甲板縱桁 Deck girder
橫桁 Cross girder
水平桁 Horizontal girder
艙口邊梁 Hatch coaming girder
機座縱桁 Engine girder
6
甲板下縱桁 Underdeck girder
舭縱桁 Wing girder
支柱 Pillar
肋骨 Frame
基礎臺架 Base frame
支架 Bear frame
舭肋骨 Bilge frame
船底肋骨 Bottom frame
首肋骨 Bow frame
肘板框架肋骨 Bracket frame
球鼻首肋骨 Bulbous bow frame
球曲型肋骨 Bulbous frame
主肋骨 Chief frame
首肋骨 Fore frame
7
桁架梁 Girder frame 舭縱桁舭縱骨 Bilge longitudinal
舯部肋骨 Middle frame 船底縱骨/縱桁 bottom longitudinal
尖艙肋骨 Peak frame 船底腹板縱桁 bottom web longitudinal
加強筋 Stiffened frame 甲板縱桁 Deck longitudinal
橫框架肋骨 Transverse frame 內底縱桁/縱骨 Inner bottom longitudinal
肋距 F.S.(frame space) 舷側縱桁/縱骨 Shell side longitudinal
縱桁/縱骨/縱向構件 longitudinal 雙層底頂縱骨 Top longitudinal of double bottom
8
斜艙壁縱骨 Slopping-bulkhead longitudinal 艙 Tank
結構 Structure 尾尖艙 after peak tank
附屬結構 Accessory structure 尾部水艙 after water tank
全焊結構 All-welded structure 輔助水柜 Auxiliary water tank
中部結構 Amidships structure 輔助壓載水艙 Auxiliary water ballast tank
泊位結構 Berthing structure 污水艙 Bilge tank
底部龍骨結構 Bottom keel structure 底艙 Bottom tank
船首部結構 Bow structure 底邊艙 Bottom side tank
支撐結構 Braced structure 貨油壓載艙 Cargo and ballast tank
橋樓結構 Bridge structure 循環水槽 Circulating flow water tank
首樓結構 Forecastle structure 循環滑油艙 Circulating lubricating oil tank
構架結構 Framed structure 清潔壓載艙 Clean ballast tank
縱桁結構 Girder structure 冷凝水柜 Condensate catch tank
人孔 manhole 干艙 Dry tank
9
艙 Tank
尾尖艙 after peak tank
尾部水艙 after water tank
輔助水柜 Auxiliary water tank
輔助壓載水艙 Auxiliary water ballast tank
污水艙 Bilge tank
底艙 Bottom tank
底邊艙 Bottom side tank
貨油壓載艙 Cargo and ballast tank
循環水槽 Circulating flow water tank
循環滑油艙 Circulating lubricating oil tank
構架結構 Framed structure
縱桁結構 Girder structure
人孔 manhole
10
飲用水艙 Drinking water tank
污水艙 Bilge tank
應急淡水柜 Emergency fresh water tank
首艙 Fore tank
首尖艙 Fore peak tank
斜邊艙 Hopper side tank
液艙 Liquid tank
龍骨艙 Keel tank
右舷艙 Starboard tank
頂邊水艙 Topside tank
頂邊翼艙 Topside wing tank
小艙口蓋 Small hatch cover
水密艙口蓋 Water-tight small hatch cover
風雨密艙口蓋 Weather-tight small hatch cover
11
密封圈 Sealing ring
鉸鏈 Hinge
把手 Handle
平衡塊 Balance block
焊接 welding
坡口 groove
單面坡口 Single groove
雙面坡口 Double groove
Ⅰ形坡口 Square groove
V型坡口 Single v groove
U型坡口 Single u groove
X形坡口 Single v groove
K形坡口 Single bevel groove
12
Y形坡口 Single v groove with broad rood face
坡口面 Groove face
坡口角度 Groove angle
焊縫傾角 Weld slope
接頭根部 Root of joint
根部間隙 Root gap
鈍邊 Root face
焊接接頭 Welding joint
對接接頭 Butt joint
角接接頭 Corner joint
T形接頭 T-joint
搭接接頭 Lap joint
十字接頭 Cross shaped joint
母材 Base metal(parent metal)
13
填充金屬 Filler metal
熱影響區 Heat-affected zone(HAZ)
過熱區 Overheated zone
焊合線 Bond line(fusion line)
焊接區 Weld zone
焊縫區 Weld metal area
焊縫 weld
連續焊縫 Continuous weld
斷續焊縫 Intermittent weld
縱向焊縫 Longitudinal weld
橫向焊縫 Transverse weld
對接焊縫隙 Butt weld
角焊縫 Filled weld
并列斷續角焊縫 Chain intermittent fillet
14
交錯斷續角焊縫 Staggered intermittent fillet
焊縫正面 Face of weld
焊縫背面 Back of weld
焊縫寬度 Weld width
焊縫長度 Weld length
焊縫余高 Reinforcement
焊腳 Leg(of a fillet weld)
焊腳長度 Leg length
套管接頭 Muff joint
手工電弧焊 Manual arc welding(shielded metal arc welding)
直流電弧焊 Direct current arc welding
交流電弧焊 alternating current arc welding
弧焊變壓器 Arc welding transformer
15
弧焊整流器 Arc welding rectifier
自動焊 Automatic welding
埋弧自動焊 Submerged arc welding
半自動焊 Semi- automatic welding
氬弧焊 Argon-arc welding
二氧化碳?xì)怏w保護焊 CO2 gas shielded arc welding
氧乙炔焊 Oxy-acetylene welding
氣割 Gas cutting
碳弧氣刨 Carbon arc air gouging
水下切割 Underwater cutting
等離子弧切割 Plasma arc cutting
連續焊 Continuous welding
斷續焊 Intermittent welding
點焊 Sport welding
16
對接焊 Butt welding
角焊 Fillet welding
搭接焊 Lap welding
返修焊 Re-welding
補焊 Repair welding
定位焊 Tack welding
封底焊 Back sealing welding
打底焊 Backing welding
堆焊 Surfacing(overlaying)
塞焊 Plug welding
槽焊 Slot welding
蓋面焊 Consmetic welding
前傾焊 Forward welding
后傾焊 Backward welding
17
分段退焊 Back step welding
分段多層焊 Block welding
深溶焊 Deep penetrating welding
跳焊 Skip welding
陶質襯墊焊 Ceramic backing welding
引弧 Striking the arc
焊接工藝參數 Welding condition
焊接電流 Welding current
焊接電壓 Welding voltage
焊接速度 Welding speed
電弧電壓 Arc voltage
焊絲間距 Wire spacing
空載電壓 Open circuit voltage
熔化速度 Melting rate
18
送絲速度 Wire feed rate
氣體流量 Gas flow rate
焊絲伸出長度 Wire extension
極性 Polarity
正極/陽極 Positive electrode
負極/陰極 Navigate electrode
左焊法 Leftward welding
右焊法 Rightward welding
電流密度 Current density
線能量 Heat input
預熱 Preheat
后熱 Post-heat
預熱溫度 Preheat temperature
后熱溫度 Post-heat temperature
19
層間溫度 Inter-pass temperature
焊后熱處理 Post-weld heat treatment
錘擊 Peening
全焊透 Full penetration welding
熔池 Weld-pool
熔深 Penetration
弧長 Arc length
噴射過渡 Spray transfer
短路過渡 Short circuiting transfer
熔滴過渡 Metal transfer
焊縫成形 Appearance of weld
焊縫成形系數 Form factor of weld
熔敷系數 Deposition coeffcient
熔敷效率 Deposition efficiency
20
熔合比 Penetration ratio
等速送絲 Constant wire-feed system
變速送絲 alternate wire-feed system
電弧靜特性 Static characteristic of arc
電弧動特性 dynamic characteristic of arc
焊接性試驗 Weldability test
焊接結構 Welded construction
焊道 Bead
焊層 Layer
正接（正極性） Straight polarity
反接（反極性） Reversed polarity
焊接位置 Position of welding
平焊 Flat position welding
橫焊 Horizontal position welding
21
立焊 Vertical position welding
仰焊 Overhead position welding
立向上焊 Vertical up welding
立向下焊 Vertical down welding
單面焊 Welding by one side
雙面焊 Welding by both side
單道焊 Single-pass welding
多道焊 Multi-pass welding
多層焊 Multi-layer welding
焊接材料 Consumables
焊條 Electrode
焊條藥皮 Coating
酸性焊條 Acid electrode
堿性焊條 Basic electrode
22
低氫型焊條 Low hydrogen type electrode
鐵粉性焊條 Iron power type electrode
重力焊條 Gravity electrode
焊劑 Flux
熔煉焊劑 Fused flux
燒結焊劑 Sintered flux
焊絲 Wire
藥芯焊劑 Flux-cored wire
保護氣體 Shielded gas
焊劑墊 Flux backing
重力焊條 Gravity electrode
焊劑漏斗 Flux-hopper
流量計 Flow meter
干燥箱 Dryer
23
焊絲盤 Wire reel
銅冷卻板 Cu-cooling plate
銅滑塊 Copper shoe
切割 Cutting
焊接工作臺 Welding bench
焊接變位機 Positioner
送絲機構 Wire feeder
行走機構 Traveler
焊接車間 Welding shop
引弧板 Run-on tab(end tab)
引出板 Run-off tab(end tab)
定位板 Strong-back
焊接襯墊 Welding backing
敲渣錘 Chipping hammer
24
面罩 Helmet
焊工手套 Welding glove
焊鉗 Electrode holder
焊槍 Welding gun
導電嘴 Tip
噴嘴 Nozzle
焊矩 Torch
焊接缺陷 Welding defect
未焊透 Incomplete penetration
未熔合 Incomplete fusion
渣 Slag
夾渣 Slag (slag inclusion)
夾雜物 Inclusion
氣孔 Blow hole
25
條蟲狀氣孔 Wormhole
密集氣孔 Porosity
針尖狀氣孔 Pinhole
白點 Fish eye (flake)
切口 Kerf
咬邊 Undercut
焊瘤 overlap
凹坑 Pit
燒穿 Burn through
未滿焊 Incomplete filled groove
清根 Back chipping
清渣 Slag removal
焊接煙塵 Weld fume
電光性眼炎 Eye-flash
26
焊接性 Weldability
碳當量 Carbon equivalent
未焊滿 Incomplete filled groove
焊接裂紋 Weld crack
熱裂紋 Hot crack
冷裂紋 Cold crack
氫致裂紋 Hydrogen –induced crack
延遲裂紋 Delayed crack
層狀撕裂 Lemellar tearing
弧坑裂紋 Crater crack
根部裂紋 Root crack
再熱裂紋 Reheat crack
熱影響區裂紋 Heat-effected zone crack
晶間裂紋 Intercystalline crack
27
橫裂紋 Transverse crack
縱裂紋 Longitudinal crack
焊趾裂紋 Toe crack
機械性能試驗 Mechanical property test
試板 Test piece
試樣 Specimen
側彎 Side bend
彎曲 Bending
橫向拉伸 Transverse tensile
宏觀試樣 Macro-etching specimen
微觀試樣 Micro-examination specimen
破斷試驗 Fracture test
抗裂試驗 Cracking test
脆性斷裂 Brittle fracture
28
塑性斷裂 Plastic fracture
焊接殘余裂紋 Welding residual stress
消除應力 Stress relieving
焊接變形 Welding deformation
角變形 Angular distortion
外觀檢查 Visual examination
無損探傷 Non-destruction testing(N.D.T.)
超聲波探傷 Ultrasonic inspection
射線探傷（X光） Radiographic inspection(X-ray
inspection)
磁粉探險傷 Magnetic particle inspection
滲透探傷 Penetrate inspection
熔池 Weld-pool
焊機（焊接電源） Weld source
29
焊接方法 Welding process
焊接工藝 Welding technology
焊接操作 Welding operation
焊接順序 Welding sequence
焊接方向 Direction of welding
常用縮語
氣電立焊 EGW
藥芯電弧焊 FCAW
實心電弧焊 GMAW
焊劑銅襯墊單面埋弧自動焊 FCB
手工電弧焊 SMAW
埋弧自動焊 SAW
30
鎢極惰性氣體保護電弧焊 TIG
熔化極惰性氣體保護焊 MIG
活性氣體保護焊 MAG
手工電弧切割 SMAC
31
機艙部分 ENGINE ROOM PART
一、機艙設備 Machines and equipment in engine room
1、主機 Main engine
1）主機油底殼 The sump tank of M.E.
2）主機飛輪 Fly wheel of M.E
3）活塞 Piston
2、發電機 Generator engine
1）應急發電機 Emergency generator engine
2）輔機 Auxiliary
3、鍋爐 Boiler
1）組合鍋爐 The composite boiler
2）鍋爐安全閥 The safety valve of boiler
32
3）燃燒器 Oil burner unit
4）水位表 Water level gauge
5）水位控制器 Water level controller
6）過量蒸氣調節閥 Excess steam pressure control valve
4、舵機
1）舵機間 Steering room
2）舵機裝置 Steering-gear
3）手操舵裝置 Trick wheel plant
4）油缸 Oil cylinder
5）反饋裝置 Feedback device
6）舵 Rudder
舵葉 Rudder blade
舵桿 Rudder stock
上舵承 Rudder carrier
33
舵銷 Rudder pintle
舵桿襯套 rudder stock liner
舵桿軸套 Sleeve for rudder stock
舵銷承襯套 Bush for rudder pintle
舵銷軸套 Sleeve for rudder pintle
上舵承底座 Rudder carrier seat
舵銷承座 Pintle bearing
舵桿承座 Rudder stock bearing
擋圈 Retaining ring
舵柄 Tiller
7）舵角 The angle of rudder
5、空壓機 Air compressor
1）主空壓機 Emergency air compressor
2）應急空壓機
34
3）主空氣瓶 Main air reservoir
4）應急空氣瓶 Emergency air reservoir
5、控制空氣瓶 Control air reservoir
6、空氣干燥器 Air dryer
7、分油機 Oil purifier
1）燃油分油機 Fuel oil purifier
2）柴油分油機 Diesel oil purifier
3）滑油分油機 Lubricate oil purifier
4）排渣 Sludge discharge
8、制淡裝置 Fresh water generator
9、焚燒爐 Incinerator
10、油水分離器 Oil water separator
11、生活污水處理器 Sewage treat plant
12、大氣冷凝器 Atmosphere condenser
35
熱水井 Cascade and inspection(hot well)
滑油自清濾器 The automatic back-flash lubricating oil filter
燃油單元 Fuel oil unit
1）主機燃油單元 Fuel oil unit of M.E
2）付機燃油單元 Fuel oil unit of A.E
3）粘度計 Viscosity controller
泵 Pump
1）主機滑油泵 Main engine lubricating oil pump
2）主機缸套水泵 Main engine cylinder cooling water
pump
3）主機缸套水預熱泵 Main engine cylinder cooling water preheating pump
4）主機海水泵 Main engine sea water pump
36
5）主機燃油供給泵 Main engine fuel oil supply pump
6）主機燃油增壓泵 Main engine fuel oil booster pump
7）主機十字頭泵 Main engine cross head pump
8）付機海水泵 Generator engine sea water pump
9）付機缸套水泵 Generator engine cylinder cooling water pump
10）鍋爐給水泵 Feed water pump of boiler
11）鍋爐燃油泵 Fuel oil pump of boiler
12）分油機供給泵 Fuel oil supply pump of purifier
13）制淡海水泵 Sea water pump of fresh water generator
14）壓載泵 Ballast pump
15）艙底消防泵 Bilge and fire pump
37
17）油渣泵 Sludge oil pump
18）柴油輸送泵 Diesel oil transport pump
19）燃油油輸送泵 Fuel oil transport pump
20）汽缸油輸送泵 Cylinder oil transport pump
21）淡水輸送泵 Fresh water transport pump
22）熱水循環泵 Hot water circulating pump
23）飲水日用泵 Drinking water pump
艙底消防總用泵 Bilge, fire and G.S pump
噴淋泵 Sprinkling pump
停泊海水泵 Harbor sea water pump
二、各種艙（箱）柜 All kinds of tank
1、柴油日用柜 Diesel oil daily tank
38
2、柴油澄清艙 Diesel oil setting tank
3、燃油日用柜 Fuel oil daily tank
4、燃油澄清艙 Fuel oil setting tank
5、滑油澄清艙 Lubricating oil setting tank
6、滑油儲藏艙 Lubricating oil store tank
7、滑油循環艙 Lubricating oil circulating tank
8、燃油溢油艙 Fuel oil overflow tank
9、燃油油渣艙 Fuel oil sludge tank
10燃油深艙 Fuel oil deep tank
11滑油污油艙 Lubricating dirty oil tank
12滑油溢油艙 Lubricating oil overflow tank
13滑油油渣打艙 Lubricating oil sludge tank
14主機淡水膨脹水箱 M.E fresh water expansion tank
15付機淡水膨脹水箱 A.E fresh water expansion tank
39
16、淡水壓力柜 Fresh water pressure tank
17、熱水壓力柜 Hot water pressure tank
18、飲水壓力柜 Drinking water pressure tank
19、淡水艙 Fresh water tank
20、飲水艙 Drinking water tank
21、鍋爐水艙 Boiler water tank
22、分油機工作水箱 Purify operating water tank
23、汽缸油日用柜 Cylinder oil daily tank
24、尾管滑油重力柜 Gravity tank of tube oil
25、排氣水封箱 Exhaust seal water tank
26、蒸餾水水艙 Distilling water tank
27、污水井 Bilge well
40
1、滑油系統 Lubricating oil piping system
2、燃油系統 Fuel oil piping system
3、海水系統 Sea water piping system
4、缸套水系統 Cylinder cooling water piping system
5、啟動空氣系統 Start air piping system
6、控制空氣系統 Control air piping system
7、排氣系統 Exhaust piping system
8、日用供水系統 Daily water piping system
9、蒸汽系統 Steam piping system
10 、鍋爐給水和凝水系統 Feed water and condensate of boiler piping system
11、燃油凈油系統 Fuel oil purified piping system
12、燃油輸送系統 Fuel oil transport piping system
41
13、滑油凈油系統 Lubricating oil purified piping system
14、滑油輸送系統 Lubricating oil transport piping system
15、艙底壓載系統 Ballast and bilge water piping system
四、儀表類 Instructions
1、壓力表 Pressure gauge
2、真空表 Vacuum gauge
3、溫度計 Thermometer
4、噸位表 DWT gauge
5、遙測表 Distant survey gauge
6、液全器 Level switch
42
7、傳感器 Sensor
五、其它 Others
1、風機 Fan
2、防海生物裝置 Anti-foul STM plant
3、泡沫柜 Air foam tank
4、中間軸 Middle shaft
5、尾軸 Propeller shaft
6、螺旋槳 Propeller
7、中間軸承 Line shaft bearing
8、泡沫滅火機 Foam fire extinguisher
9、飲水消毒裝置 Sterilizer plant
10、主配電板 Main switch board
11、機艙集控臺 Engine room control console
43
12、機控室 Engine control room
13、臺虎鉗 Vise (=vice)
14、表銅截止閥 Bronze close valve
15、表銅截止止回閥 Bronze check valve
16、鑄鐵截止閥 Cast iron stop valve
17、鑄鐵截止止回閥 Cast iron check and stop valve
18、調節閥 Adjustable valve
19、溢流閥、安全閥 Relief valve
20、減壓閥 Reducing valve
六、材料 Material
1、管子 Pipe
2、無縫鋼管 Seamless steel pipe (tube)
3、紫銅管 Purple copper pipe
44
4、鐵法蘭 Iron flange
5、銅法蘭 Copper flange
6、盲板法蘭 Blind-flange
7、螺絲（螺栓） Bolt
8、雙頭螺絲 Stud
9、螺帽（螺母） Nut
10、不銹鋼螺絲 Stainless steel bolt
11、墊片（床） Gasket
12、橡皮床 Gum gasket
13、紙箔床 Paper copper gasket
14、紫銅床 Purple copper gasket
15、石墨床 Black lead gasket
16、青鉛床 Black lead gasket
17、佛納 Feeler gauge
45
18、支架（馬腳） Clamp
19、油漆 Paint
20、備件 Spare parts
七、生產工具 Produce tool
1、圖紙 Drawing
2、活絡鈑 Adjustable spanner
3、令司板（梅花鈑） Ring spanner
4、開口鈑 Open –ender spanner
5、管子鉗 Pipe wrench
6、鑿子 Chisel
7、鋃頭 Hammer
8、銼刀 File
9、螺絲刀 Screwdriver
46
10、油漆滾筒 Paint roller
11、油漆刷子 Paint brush
12、鋼鋸 Hacksaw
13、套筒扳手 Socket spanner
14、手電筒 Torch
15、鉆頭 driller
八、英語會話
1、早上好 good morning
2、今天我們準備交驗油水分離器Today we will test the oily-water separator.
3、請跟我來Please fellow me.
47
4、首先請檢查安裝說明和電氣絕緣Please check the condition of installation and insulation first
5、我們準備將油水分離器動轉Now we will run the oily-water separator
6、請檢查動轉情況Please check the running condition
7、接著我們一個一個地做報警/安全保護裝置的功能試驗Now we will do the function test about alarm and safety device
8、設備交接基本結束Now the test is over
9、請部有何修改意見？Do you have any question ?
48
10、非常感謝Thanks
11、再見Good bye
12、請把這對法蘭撬緊松開Please tighten/release the flange
13、這路管子是從發電機單元來的The piping is from to the G/E unit
14、這對法蘭/接頭在漏This flange /connection is linking
15、這路系統的試驗壓力是7公斤The test pressure of the piping system is 7 bar
16、這里請加強 please make a clamp here
49
17、這里增加一只落水斗Add a drain plug here
18、請用空氣壓縮空氣吹干Please dry it by the compressed air
19、我將回車間支拿肥皂水I will com to my workshop to take some soap water
20、這個系統非常重要的，一定要認真檢查T(mén)his system is very important ,please check it carefully
21、請交驗收整改意見Please check your remarks
22、天太熱了，請休息一會It’s too hot ,please take a rest
23、我負責這項工作 I am in charge of this job
電氣部分 ELECTRIC PART
50
一、常用詞匯 Words and expression
2182千赫值班接收機 2182KHz watch receiver
A異常 Abnormal
應答 Acknowledge
有功功率 Active power
執行器 Actuator
調整 Adjust
空氣斷路器 Air circuit breaker
報警系統 Alarm system
交流電 Alternating current
電流表 ammeter
放大器 Amplifier
本站僅提供存儲服務，所有內容均由用戶發布，如發現有害或侵權內容，請
點擊舉報。
