1. Open device manager (SCSI/RAID Controllers section) and delete SCSI controller with name corresponding with name of Daemon driver
(miniport driver name). If you have problems doing it (eg. system crashes) then start from step 3 (skip steps 1 and 2).
步驟1、打開設備管理器（“SCSI和RAID控制器”部分）然后刪除對應Daemon驅動名（miniport driver名）的SCSI controller設備。若出現問題導致這個步驟不能進行（例如系統崩潰）則從步驟3開始（跳過步驟1和步驟2）。
2. Open device manager (System devices section) and delete device with driver corresponding with Daemon driver (bus driver name). In current versions of Daemon Tools it is 'PnP BIOS Extension' but most likely it may change in next versions. Again, if you have some problems doing it, skip this step
步驟2、打開設備管理器（“系統設備”部分）然后刪除對應Daemon驅動名（bus driver名）的設備。當前版本的Daemon Tools中這個設備名是“'PnP BIOS Extension”但下個版本里很有可能會換個名字。再說一次，如果進行這個步驟有問題的話，請?zhí)^這一步。
3. Find Daemon driver files in Windows\System32\Drivers folder
(in Win95/98/ME also check Windows\System\IOSUBSYS folder).
Make sure your system is configured to display system files (ControlPanel->Tools->FolderOptions->View) in order you can see them. Delete Daemon driver files.
default v3.46 driver file names are d346bus.sys and d346prt.sys
default v3.47 driver file names are d347bus.sys and d347prt.sys
步驟3、在Windows\System32\Drivers文件夾中查找Daemon驅動文件（在Win95/98/ME系統中還要查找Windows\System\IOSUBSYS文件夾）。
為了能看到這些文件請確定你的系統已經配置為“顯示系統文件”了（控制面板-工具-文件夾選項-查看）。刪除Daemon驅動文件。
默認的3.46版本驅動文件名是d346bus.sys和d346prt.sys
默認的3.47版本驅動文件名是d347bus.sys和d347prt.sys
4. In WinNT/2000/XP/2003 open registry editor and check HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services for entries with same names as Daemon driver files. Delete these keys.
步驟4、WinNT/2000/XP/2003的系統請打開注冊表編輯器然后檢查HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services中跟Daemon驅動文件同名的條目。刪除這些項。
5. Find d347bus and d347prt in registry and delete(347 is your daemon's version). Reboot your system. If you executed steps 1 and 2 then you don't need to do anything anymore. Otherwise proceed to next step.
步驟5、搜索注冊表中的d347bus和d347prt項并刪除（347是你所安裝的daemon版本號）。重新啟動你的系統。如果執行了步驟1和2那么你不需要再做什么了。否則進行下一步。
6. Go to device manager - you may see some device with yellow mark.
This is most likely Daemon device which cannot start because it's drivers are deleted. Delete this device from Device Manager.
步驟6、打開設備管理器 - 你也許會看到某些帶有黃色驚嘆號的設備。
這很可能是不能啟動的Daemon設備因為它們的驅動被刪除了。從設備管理器里刪除這些設備。
The same procedure may be used also for complete removal of Alcohol drivers from system.
類似的步驟也許能用來從系統中完全移除Alcohol設備。
本站僅提供存儲服務，所有內容均由用戶發布，如發現有害或侵權內容，請
點擊舉報。
